Showing all 6 results
-
B30 – Control valve – blankable – 30lpm
B30:
Simple compact and heavy duty design 1 to 10 sections.
• Steel inlet and outlet sections, available in several configurations
• Cast iron working sections
• Different types of spools
• Different options to be flanged on the workports side
• Available in parallel and series circuits
• On/off solenoids controls.
• Proportional solenoids controls
• Emergency handlever available. -
PK80 (AUTOMATIC KICK OUT)
Technical parameters: Modification / Spools with 1 to 6 Spool stroke +/- 7 mm Nominal flow 80 l/min Max operating pressure, P=250; T=50 bar A , B = 300 bar Ambient temperature -40C…+60C Hydraulic liquid – mineral oil based/hydraulic oil Viscosity 12 …800 mm2/s Fluid temperature -15C…+80C Filtration 10 to NAS 1638 Leakage(A,B-T) 18cm3/min at 120bar Actuating force < 220 N -
PX80 HEAVY DUTY
Technical parameters: Ambient temperature -40C…+60C Hydraulic liquid -mineral oil based/hydraulic oil Viscosity 10 …400 mm2/s Fluid temperature -25C…+60C Filtration 10 to NAS 1638 Max operating pressure, P=250; T=30 bar A , B = 250 bar Leakage(A,B-T) 18cm3/min at 120bar Nominal flow 80 l/min Spool stroke +/- 7 mm Actuating force < 220 N -
TYPE P45
Simple, compact and heavy duty designed monoblock valves from 1 to 7 sections for open and closed centers hydraulic systems.
Monoblock valves of P45 model are charecterized by a single body having the following features:
-Low production cost, sound construction, compact size
-Fitted with a main preassure relief valve and load check valve
-Available with parallel circuit
-Optional carry-over port
-Diameter 16mm interchangable spools
-A wide variety of service port valve options
-Actuation is manual, pneumatic, hydraulic, electro-hydraulic and remote with flexible cables spool control kits -
TYPE PC45
Simple, compact and heavy duty designed 1 to 12 sections for open and closed centers hydraulic systems.
-Fitted with a main relief and load check valve on each section
-Available with parallel, tandem and series circuit
-Optional power beyond port
-Wide variety of port valves
-Available manual, pneumatic, electro-pneumatic, hydraulic, electro-hydraulic, solenoid and cable control kits
-Interchangeable 16mm spools -
TYPE PF40 Work Flow Control
Manually or mechanically controlled hydraulic distributor 03PF40 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It has parallel action. Setting of flow rate is possible to the first spool and the remaining flow rate is used by subsequent spools
Construction: 03PF40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Spools are made of carburized steel with hard chrome plating
Mounting: The distributor is fixed with two bolts M8.