Manually or mechanically controlled hydraulic distributor 03PF40 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It has parallel action. Setting of flow rate is possible to the first spool and the remaining flow rate is used by subsequent spools
Construction: 03PF40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Spools are made of carburized steel with hard chrome plating
Mounting: The distributor is fixed with two bolts M8.
| Technical parameters: | |
| Nominal flow (priority) | 2-25 l/min |
| Max operating pressure, P=250; T=50 bar | A , B = 300 bar |
| Modification/Sections | 1 and 3 |
| Hydraulic liquid -mineral oil based/hydraulic oil | |
| Viscosity | 12 …800 mm2/s |
| Fluid temperature | -15C…+80C |
| Filtration | 10 to NAS 1638 |
| Leakage(A,B-T) | 15cm3/min at 120bar |
| Ambient temperature | -40C…+60C |
| Spool stroke | +/- 6 mm |
| Actuating force | < 200 N |
